Automatically adjust welding target position during welding
Improve Welding Quality
Detects welding position and gaps, automatically adjust
torch angle and welding conditions, preventing welding failure.
Shorten teaching hours
Automatically detect welding start point, finish point,
1 program is able to handle different welding lengths.
Easy teaching
Can be operated by teach pendant.
Key features and benefits
Measuring method
Automatic laser synchronizer triangulation
Standoff
82,5 mm
(The word “standoff” is the distance between the bottom of the sensor head and the near end of the
measurement range)
Measurement Depth
65 mm
Measurement Width
Near end: 23 mm, Far end: 46 mm
Average resolution (Depth)
0.103 mm
Average resolution (Width)
Near end: 0.023 mm Far end: 0.040 mm
Measurement cycle
50 images (Maximum)
Laser source
Visible red laser diode (Wavelength 660 nm)
Classification
Class 3B (Output 120 mW or less)
Dimensions (W × D × H)
192 (W) × 91 (D) × 53.8 (H) mm
Weight
0.89 kg
Working ambient temperature
0–40°C
Working ambient humidity
20–85%RH (No condensation)
Cooling method
Forced air cooling with dried air
(Use in combination with a water-cooled torch and/or high-current welding in narrow grooves may
raise the ambient temperature of the sensor head more than the specified range. In this case, we
suggest the water-cooling option. Ask for pretesting to check if this can work.)
(Dried air (oil and mist-free) is required. When the air contains (oil) mist, use air filters.
Mist in Cooling air can cause the product to malfunction.)
